View Single Post
  #2   Report Post  
B
 
Posts: n/a
Default

Google "piano hinge".
-B

"barry martin" wrote in message
news:1965640614.2583.98.6022765.1289014444.RIMEGat ...
TheKidd:

T I'm finishing off my basement.
T In one area of the basement I have a small bump out in the foundation

where
T the front vestibule is built on.
T We use the space for storage of Christmas decorations and that sort.

I
T thought it would be a cool idea to build a bookcase in front of the

area
T that would hide the storage but give us access via a secret door. The

area
T is 6'6" wide where the bookcase would be. I'm trying to figure out

what
T kind of hinge I could use in order to have the bookcase swing out and

gain
T access to the storage.
T I think what I'd do to lessen the weight is to split the bookcase into

2
T doors that swing out. Probably also put wheels of some type under the
T bookcases to help in moving the doors as well as taking some of the

weight
T off the hinges.
T Still, I haven't a clue as to what to use. Most of the hinges I've

seen are
T for normal doors. I thought of using black pipe attached to the

bookcase
T somehow and then figuring out some type of attachment that had a

bearing
T mounted at each end going to the floor and ceiling but HD or Lowes

doesn't
T have anything that I can put together.
T
T I was wondering if anyone out there has ever attempted doing something

like
T this and had recommendations?

If I were to build that sort of bookcase I would probably use a piano
hinge -- it's one continuous hinge rather than several individual
hinges. I would also probably use caster(s) or some sort of roller to
support the bottom -- of course that would definately leave tell-tale
marks if there is carpeting.

A double-hung door (hung from both sides, opens from the middle) would
lighten the load but may also make the seam more obvious.

Support of the far edge (opposite of the hinge) is important. The old
shed here was a commercially-produced kit with two large hinges
supporting a 4 foot wide door. IIRC 1x4 frame covered by pressboard.
After several years we noticed the door was sagging.

-
¯ barry.martinþATþthesafebbs.zeppole.com ®

* October 8 - National Fluffernutter Day
---
þ RoseReader 2.52á P003186
þ The Safe BBS þ Bettendorf, IA 563-359-1971
---
þ RIMEGate(tm)/RGXMod V1.13 at BBSWORLD *