I have that chuck from Highland Hardware (from PSI) and while it is not as
nice as the Oneway Talon, it gets the job done for me. The trick in setting
it up is to be sure all surfaces on the face of the chuck are clean before
attaching the jaws, and be sure they are installed in the right order on the
chuck face..

Greg G. wrote in message
...
George said:

3/8 for a mini. I'd get a 1/2" detail gouge first, though. Better at
hollowing.

M2 will do, powder is nice.

Thanks again for the info, George.


Greg G.