"Marty" writes:

Thank You,

I am very sorry, I was not aware that this was an inappropriate post.

There is no need for anyone else to respond.

There was nothing wrong with your post. Some people are just very
intolerent.

Some of the likely causes for icing are (1) temperature too cold (below
around 60F), (2) insufficient airflow (dirt on coils or bad fan), and
(3) low Freon (not all that likely).

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header is ignored.
To contact me, please use the feedback form on the S.E.R FAQ Web sites.