"Timo" wrote in message
...
I want to drill six holes with a 3/8" masonry bit, to set some lag screws
in
the mortar in a brick wall. I'd also like to widen two holes in a steel
bike
rack; they are a few mm. smaller than 1/2" in diameter and I want to make
them 1/2". Since I don't do this sort of thing very often, I don't want
to
buy more drill than I need to. I have a small Black & Decker drill for
around the house. I'd be grateful for suggestions on make/model ... an
inexpensive drill with enough power to do these tasks. Not a problem if it
takes one drill longer than another to drill into masonry and steel; I
just
don't want to burn it out.
Thanks
Timo

Harbor Freight for the masonry bits. Your drill will work just slow


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.775 / Virus Database: 522 - Release Date: 10/8/2004