Im making a 1/2 of cylinder 3' outside diamter - 2'7" inside diameter to be
used as a base of a table Im making.

I tried using bending ply w/ veneer - but I can get the color to match w/
what is on the rest of the project (1/2" oak ply)
So im going to use the 1/2" oak ply - kerf cut it and bend it around the
staves (or ribs or what ever you want to call them)
Is there some general rule of thumb on how far about the kerf cuts want to
be and how deep?

Thanks
Rob

You can reply to me at
r_b_v at v_e_r_z_e_r_a doht c_o_m

remove _ to get the correct address