In article , "Slugsie"
says...

"Rob Morley" wrote in message
t...


Whoops, there's a space in there - if that doesn't work this should:

http://homepage.ntlworld.com/error40...empus4page.pdf

Thanks, got it now.

The problem isn't so much the connections on the new controller, it's
figuring out what the connections on the old controller are so that I know
where to connect them to the new one.


You'll have a live and a neutral feed which should be easy enough to
find - they'll be directly connected to the motor (or find live with a
mains tester and neutral because it's hopefully paired with the live).
Then you'll have a neutral outlet and one or more switched live outlets
- you can probably identify these by holding a mains tester to each wire
in turn and turning the switch to see whether/when it becomes live.
Don't get bitten :-)