Hi, a brief follow up to what I wrote about the Compaq FS740 17"
monitor:

1) The power LED goes to on/off and standby in the absence of a signal
from the PC as expected.
2) The CRT heater is functional.
3) The EHT SOUNDS like it is working (static).
4) Degaussing circuit works.
5) I have re-soldered nearly all points on the main PCB.

There is still no sign of anything on the display.... No flashes, no
glow, no on-screen display.... Help!

Brian.

(Brian) wrote in message . com...
Hi,

I have a FS740 17" monitor (2001 Canadian model) which won't turn on.
The LED changes to green when the power switch is pressed, but thats
as far as it gets - no display. I think that the HV turns on for a few
hundred milliseconds and then shuts down. Any suggestions as to what
components I should check (or help in getting a schematic diagram)
would be great. I have done a basic inspection for dry joints on the
PCB, and all looks ok.

Thanks,
Brian