View Single Post
  #12   Report Post  
Amish Biker
 
Posts: n/a
Default

Isn't it muriatic acid that is typically used to prep the floor? I believe
Rustoleum uses a bit milder acid by using a citric solution. What does the
manufacturer suggest to clean the acid from the floor prior to painting? The
acid has to be gone for the paint to stick. Seems like the same procedure
would work in the puddle.

--

Amish Biker

"Bill Lewis" m wrote in
message ...
Hi all,
I am about to do the epoxy finish on my garage floor, and I have a
question about the acid used during the etching process. Basically, my
dilemma is this: About 15-20 feet from the bottom of my driveway, there
is
a 8-12ft diameter perpetual puddle that is consistenly fed by rain and all
of my neighbors' sprinkler runoff. This puddle is used by the local
wildlife (birds, etc) all the time. This puddle is also where my runoff
will go when I rinse the acid from the floor after etching. Now, I'm not
interested in killing/harming/whatever all of the animals that use this
puddle, so my question is this: is the acid nuetralized or anything after
the use on the garage floor, or would it still be toxic? My thought would
be to use a push broom/squeegee to get this puddle moving and the area
rinsed after acid exposure if I have to.


Any input would be appreciated (particularly if you are a chemist! ;p)

Thanks!

Bill Lewis