View Single Post
  #11   Report Post  
Andy Hall
 
Posts: n/a
Default

On Mon, 20 Sep 2004 20:31:12 +0100, "IMM" wrote:



Two W-B Juniors can provide excellent flow rates, back up as two boilers

is
there and CH zones without any additional zones valves. Installation is
fully DIY and simple. Electrical work consists of a mains to each and

one
wire to a clock programmer to each. It is also cost effective costing
around £1100. Cheaper if you negotiate as you are buying two.


These require 28kW apiece.


They have 24 and 28


Even at 48kW there's barely enough left for a cooker.



You have never seen one. Stop making things up.

There's nothing to make up. the spec. gives the entire story.

Pitty you can't understand it.


There's nothing to understand. It's a 57 litre store at 60 degrees
and a 28kW boiler. Nothing more that one needs to know to determine
exactly how it will behave.


You still haven't got it.


There's nothing to get.



This product delivers 50
litres of water at 60 degrees and then falls back to 11 lpm of 40
degree water.

Near 60 litres. Performance for one bath and shower is excellent.

Well
worth considering.

It's barely adequate for a drop in the bottom bath and 11lpm for a
shower is woefully inadequate.

You are an idiot.

We did the sums on this last week.


We? You you mean. You are still an idiot.

Sorry I forgot. You had problems with multiplication and division and
understanding the formula for mixing water of two different
temperatures together.






..andy

To email, substitute .nospam with .gl