"Andy Hall" wrote in message
...
On Thu, 16 Sep 2004 23:50:29 +0100, "IMM" wrote:
"Andy Hall" wrote in message
To be a bit more accurate:
The formula for resultant temperature of mixing water is
Vc[Tf - Tc] = Vh[Th - Tf]
Where upper case V=volume T=temperature
and lower case h=hot, c=cold and f=final
The store holds 57 litres according to the manufacturer
If the mains water temperature is 5 degrees:
Vc[40 - 5] = 57[60 - 40]
Solving for Vc gives 32 litres and a total of 89litres which is not
enough even for an IMM bath of 100litres. For a reasonable bath of
150 litres It is only jut over half way there and at 11lpm will take a
further 5 minutes or more to fill.
At 10 degrees cold temperature, you could add 38 litres but still you
would be at less than an IMM bath and still at nearly 5 mins to fill
to produce a reasonable bath.
You have clearly never seen a CB50 in action they fill 100 litres baths
no
problem, summer and winter.
It's irrelevant. The machine can't defy
physics,
Well they defy Andy's version.
snip babble
|