Sorry about not telling you about what type of sheen I am
looking for. The poly will be sprayed on at least 2 coats to
begin with then sanded. Another coat or 2 will be applied. Then
as with lacquer the table will be sanded to remove any orange peel
and dust. The final sheen should be a gloss smooth finish. The wood
is quarter sawn oak and wavy oak (this was filled).
About 2 inches around the outside edge of the table is sprayed black.
The reason for the high sheen is that it brings out the wavy pattern
and the quarter seen oak. I was not sure if the table should be
finished as if it was sprayed on using lacquer and how this is done.
If you have some names of products in mind that would be great.
thanks in advance