"raymondj" wrote in message
om...
This sounds like a good idea! I already have a Dewalt 4.5" angle
grinder. What type of grinding device do you use? Just a metal
sanding disc? Do you grind using the flat part of the disc or do you
use the side (as if you were using a metal cutting disc) ?

Thanks for the good idea.



I use the standard 4-1/2" grinding disks, about 1/4" thick. Hold the grinder
so just the edge of the wheel touches the blade. I usually mount the blade
in the vise so the edge I am sharpening sticks out the left side of the vise
and points up.
Greg