Hi Guys,
I don't know about Oil in the USA but from an old retired Sewing Machine
Mechanic in New Zealand we always used "Mobil DTE light" I would think you
would have something similar. Any good "Light" Hydraulic oil
would do.
Jack
"Ivan Vegvary" wrote in message
news:3k9%c.5694$PK3.1372@trnddc08...
Thanks for all the above advice.
I did happened to have a gallon of spindle oil, so I used some of that.
Will change when stores open tomorrow.

Thanks,
Ivan Vegvary
"Ivan Vegvary" wrote in message
news:AU4%c.2878$Q44.1498@trnddc09...
I need to fill the bottom of my Juki sewing machine with oil (approx. 1
pint). Need it today (holiday) because my daughter is leaving for
college
and I promised her that I would make a slip cover for her club chair.
Obviously, holiday and everybody is closed. Can I use the "way" oil
that
I
use on my milling machine and lathe (required metal content). Could I
use
the "way" oil and then replace it later?

Is there anything special about sewing machine oil? Local Ace is open
but
I
don't want to buy 20 small tins of "3-in-1" oil.

Fast advice appreciated. Thank you!!

Ivan Vegvary