TV servicing is not something you can really learn at home. It takes a
descent formal education in basic electronics, and servicing to even have an
idea about how to get started.

I would suggest you give the set out to an authorized service centre to have
it properly serviced. I doubt very much you will have much success with this
repair, unless you are very lucky and guess at the proper parts to change.

The idea is to take measurements and determine by doing tests of the various
components, to determine the parts that have failed, and then replace them.
It is also important to find the cause of the failure, in order to insure
that there will not be another failure of the same parts, shortly after the
set is switched on again.

--

Jerry G.
==========================


"John" wrote in message
om...
Andy Cuffe wrote in message
. ..
On 3 Sep 2004 18:11:04 -0700, (John) wrote:

I'm new at electronics,but on my mitsubishi 35" tv I found a 560 cap
that looks like a resistor with colored bands on it.Also I found
another 560 cap on a different circuit and that I can see is a cap.My
schematic says their both 560 caps why would one be different then the
other?

I don't really understand your question. What kind of problem are you
trying to fix and what makes you suspect these caps? That type of cap
is very reliable; I've never seen on fail.
Andy Cuffe


My question was what type of cap was that?I have a horizontal line in
the middle of the tv.I was told to replace the vert output IC la7838
and all the caps that start with 4 because the vert output IC starts
with a 4,ic401.Now if you can tell me exactly which caps to replace
then that would help alot.