Andy Dingley wrote:

On Wed, 01 Sep 2004 22:46:08 GMT, Chris J Dixon
wrote:

What type of high temperature cabling should I use to connect the
lamps to the transformers?

You shouldn't need any. If the "hot zone" is bigger than the tails
that are already on the fitting, then you need to rework the
installation and improve the ventilation. Outside the hot area, 79
strand speaker cable is just the ticket.

The lamps have a short length of high temp cable running to a
connector on an arm about 75mm above and to one side of the
fitting

As I said in the bit you snipped

I plan to use ceramic plant pots as suggested elsewhere to cover
the lamps and mount the transformers somewhere above the eventual
level of the loft insulation (which may require the odd bit of
timber to support them)

There is no way to be able to enclose the fittings to keep the
insulation away without the connection point being within the
enclosure.

Chris
--
Chris J Dixon Nottingham UK


Have dancing shoes, will ceilidh.