Jerry G. wrote:

We use some diluted Windex. I mix it to be about 30% Windex. Great care has
to be taken to not get the water in to the equipment. If more strength is
needed for a particular job, then less dilution is in good order.


I think that any place Windex can be used, Glass Plus is better. As I
recall, Windex has some ammonia in it that will attack some materials.

I don't have any stake in which you use, and was originally turned on
to Glass Plus (again as I recall -- it has been a while) by a
recommendation on the Hewlett-Packard Web site, who suggested it for use
cleaning their scanners.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .