Douglas Johnson wrote:

I have a Jet 18" bandsaw with a 1 1/2 hp motor. The motor is wired for 220v.
It starts and runs, but placing even the slightest load on it slows it down
dramatically, then blows the breaker. This is a brand new behavior. When I
turn the blade by hand, it moves smoothly and easily. I'm going to try another
blade in case this one is dull, but haven't yet.

Any suggestions?

Thanks,
Doug



If the blade doesn't help I'd try changing the breaker.

--
Jack Novak

Buffalo, NY - USA
(Remove "SPAM" from email address to reply)