"Mike Hibbert" wrote in message
...
"JH" wrote in message
...
"Mike Hibbert" wrote in message
...

Hi Jules,

I'm not gonna be any use here, but, I have just posted wiring question
about
the CM67 RF, seeing that you managed to wire it in successfully, any
advice
you can give me will be great!

Cheers
Mike


(putting to one side the problem I currently have)

I was unsure to start with too but studying the wiring diagram (diag 5 c
on
the install instructions) and help from this newsgroup helped (see my
original query)


http://groups.google.com/groups?hl=e...tf-8&safe=off&

frame=right&th=ec6714d44df72819&seekm=2EiJb.15422% 24FN.2759%40newsfep4-winn.
server.ntli.net#link1

In reality, it is really straightforward. In simple steps,

1. wire in a main supply (L+N)
2. link with a wire the live terminal to the 'A' terminal
3. wire the brown control wire (labelled BR in diag 5c) from the zone
value
to the 'B' terminal

Thanks Jules,

So the live is a "real" live and the terminal "b" is your switched live
back
from the stat?

Cheers

Mike



Yes, 'B' is the switch the stat uses to turn the system on and off to
maintain the room temperature.

Why on earth the manufactures make it out to be rocket science is strange -
all central heating does is turn on when the time is right and the temp is
too low.

Caveat - my new set up is still not working properly so maybe it is rocket
science.

Jules