On Wed, 14 Jan 2004 12:25:19 GMT, "Moi" wrote:

Hi, I have the Indesit Omega 1200 (WDG1295W) Washer/Dryer.

When I have a relatively small load of socks etc. and put them on to dry for
120 mins. following a thorough spin-dry, they do not dry properly. It takes
a total of 6 x 120 min. sessions (12 hours!) before they are reasonably dry.

Sounds like the heater or a stat that is at fault. Does the machine
even get warm, chances are that it is not drying them at all, they'd
probably dry quicker on the radiator!
Could be something more complex but check the obvious fist, check for
power at the heater element.
Check all the airways are clear and that the condensor is clean,
empty, unblocked etc.

This is a washer/dryer with no air exhaust port, it just says in the manual
that it uses the water expulsion pipe to get rid of the air (presumably this
just comes out of your sink hole). It has always been bad, but seems worse
lately.

Have you had it from new?
In simple terms the moisture in the clothes is dropped into a
resorvoir then pumped into the waste.
I personally wouldn't buy an Indesit, too many come from Indesit not
working before we even plug them in!


SJW
A.C.S. Ltd.