View Single Post
  #5   Report Post  
Rich Greenberg
 
Posts: n/a
Default Disabling Burglar/Fire Alarm

In article ,
Punch wrote:

now you should just have the wire going to your phone and the fuse panel,
remove the phone wires, follow them to the demarq jack and cut them off.


If you follow this instruction literally, you will likely find that your
phone is dead. The better alarm systems are set up so that the phone
circut passes through the alarm box so that the alarm is able to seize
the line if it is offhook.

You will likely find that the phone line coming into the house is
connected to a pair going to the alarm box and another pair coming out
of the alarm box feeds the house. Disconnect the alarm wireing and feed
the incoming phone wires to the house circuts directly.

--
Rich Greenberg Work: Rich.Greenberg atsign worldspan.com + 1 770 563 6656
N6LRT Marietta, GA, USA Play: richgr atsign panix.com + 1 770 321 6507
Eastern time zone. I speak for myself & my dogs only. VM'er since CP-67
Canines:Val(Chinook,CGC,TT), Red & Shasta(Husky,(RIP)) Owner:Chinook-L
Atlanta Siberian Husky Rescue. www.panix.com/~richgr/ Asst Owner:Sibernet-L