"Brandon" wrote in message
news:3KYKc.3248$_K2.3242@lakeread02...
The only non-electric control valve that is metered and automatic is
form
Kinetico but... I have many control valves that are electric and have
sealed
covers meant for outside use. And I would suggest them over non-electric
for
a number of reasons in addition to the price of the control.
I can tell you the volume of resin the tank can hold if you tell me how
tall
the tank is and the diameter. I would also need to know what type tank;
very
flat and smooth plastic or plastic but stranded fiberglass.
Gary
Quality Water Associates
www.qualitywaterassociates.com
Bulletin Board www.qualitywaterassociates.com/phpBB2
The unit is a 1 piece system with the resin tank enclosed in the brine
tank.
Because the tank is confined within the brine tank, I got as accurate of
measurements as possible as it sits in the back of my truck.
The tank appears to be 37 inches tall with a diameter of 11 inches. It is
stranded fiberglass.
I appreciate the input on the control valve so far as the non electric.
What valve do you recommend for this resin tank?
Thanks again
Brandon
The Clack WS-1 and Fleck 7000 are IMO the best control valves on the market
today. hey both have soft water brine refill and the 7000 has variable
brining and variable reserve. The Clack WS-1 is the easiest to repair and
does not need any special tools as the 2510, 5600, 9000 and 9100 valves
do.And it comes apart in 5 minutes without having to remove it from the
by-pass valve or resin tank for any reason. No other control valve offers
that. Repair parts are the lowest cost of any control valve including big
box store brands.
Gary
Quality Water Associates
www.qualitywaterassociates.com
Bulletin Board
www.qualitywaterassociates.com/phpBB2