I recently posted an item about a towbar-mounted bike rack and the problem I had with the attachment bolt getting stuck and being damaged when I removed it by force.
I've managed to order a new bolt from Witter and it will come with the bit of metal that holds the nut. My puzzle now is how I'm going to remove the bit of metal holding the bolt
This picture shows the thing in question
https://user.fm/files/v2-9b5da063c16...rier%20(1).jpg
From my picture it looks as though the thing would slide out but it won't because the metal has a slight "tab" punched in it on the inside at each end to make it wider than the hole it sits in. I've tried to pinch it with a G clamp and hammering it but it's too strong to move it.
I'm at a loss to know how I'll take the old one out and put the new one in?