On 04/06/2021 15:35, Chris Bacon wrote:
On 04/06/2021 14:27, Suzanne Clarke wrote:
Hi

The screws, which were invisible before, start half way into the plank
and then screw into the base.Â* How on earth is that done?

You want a plug cutter, you do. Get a good one, about £15-£20, not some
£9.99 crappy set of four. Don't use it on gritty boards or it will
become k-nackered.

Yup that will give a fairly close match if you cut the plugs from
similar wood and take the time to match the grain.

You might be able to get away with some ready made tapered plugs, and a
10mm lip'n'spur bit to part drill the start of the hole.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/