Immersion heater
On 02/06/2021 11:46, JohnP wrote:
Daughter called me to look at immersion heater. The neutral connection had
failed. I trimmed back the cable and re-made the connections - but I felt a
bit un-easy as the terminals seemed quite poor - a post with a nut for N
and a small screw clamp in the thermostat for the +.
Are newer ones any better?
There's usually two washers on the post, so that the wire is clamped
rather than screwed up. Otherwise what you describe is typical.
I am wondering if there is a better flexible that the one installed. Any
recommendations?
flexible what?
PA
|