On 20/04/2021 10:33, Tricky Dicky wrote:
On Tuesday, 20 April 2021 at 09:57:41 UTC+1, JohnP wrote:
Pet hate is the back box for sockets and switches. The way of cramming in
the cables is crude. Especially as if you change a fitting the termianls
can be in a different configuration.

I would like to suggest - for your views!

The circuit cables attached to a terminal block that is a part of the back
box. The switch or socket would be connected to that block with a fly lead
that would be an integral part of that switch / socket with a Wago type
connector.

Any sympathy for this idea?

I cannot see that coming but there is potential for Wago type connectors on double sockets. I have seen a video of someone who mocked up one just as a demonstration. Light switches, single sockets and other 1-gang accessories could be problematic to fit in existing back boxes and that is where the real problem is in backward compatibility.

Richard


It may mean that back boxes have to be deeper. Cooker switches or light
dimmers often have to be fitted to deep back boxes - and this is without
them also being stuffed with extra connectors.

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk