View Single Post
  #8   Report Post  
Posted to uk.d-i-y
ARW ARW is offline
external usenet poster
 
Posts: 10,161
Default Electric towel rails - none seem to have IP ratings

On 14/02/2021 12:16, Chris Green wrote:
Robin wrote:
On 14/02/2021 10:20, Chris Green wrote:
I am looking for an electric (only) towel rail with a thermostat for
installation in a toilet (no washbasin actually in the cubicle, it's
just outside the door).

There's a blanked off ex-socket where I can install an FCU so I can
hard-wire the towel rail.

However I can't see any sort of IP rating with any of the towel rails
I can find. Presumably they're rated for bathroom zones but I can't
see any actual evidence of this.

We don't want to spend a lot on this, needs to be less than £100 at
the very most. There's lots of possibles, like this:-

https://www.ebay.co.uk/i/27253669021...571623109 848

but no clue as to their IP rating etc.

I suppose that for the location where we want to put it it's
effectively outside any sort of bathroom zone but I'd really prefer
something that is rated for and safe in such a location.

Any pointers/suggestions?


TLC-Direct have some - eg "Splash-proof (IPX5 rated) for use in
bathrooms and other wet areas" @ £86.40

https://www.tlc-direct.co.uk/Products/DXTTRS120W.html

No thermostat, as shown in the picture it would appear to be
permanently on with no way to control it or turn it off. The FCU
can't be switched as that would then have to be properly rated for the
area it's in.



You have lost me Chris.

What bathroom zone is the FCU in and what "rating" do you think it needs?

A towel rad probably needs double pole switching so an unswitched FCU
would not be suitable.


--
Adam