any reason I couldn't tap into a French drain to use it as a basement floor drain?
My water treatment equipment and hot water heater are at the opposite
end of the basement from the sump, which seem to be hooked to a French
drain. There is about an inch of blue styrofoam all around the
perimeter of the basement; when I busted a few chunks of it out I saw
crushed rock underneath.
I'm thinking about somehow setting up a system to drain the equipment
to the crushed rock below the floor. This would save a bunch of
shop-vaccing water off the floor when I have to break fittings for
maintenance, or if something breaks.
Any problems with such an approach?
Thanks,
Pete.
|