View Single Post
  #5   Report Post  
Posted to alt.home.repair
rbowman rbowman is offline
external usenet poster
 
Posts: 9,074
Default Smart Electrician timer with 6 outlets timer SP-043 needinstructions

On 01/23/2021 05:28 PM, edward geiser wrote:
On Saturday, January 23, 2021 at 3:12:36 PM UTC-6, Ed Pawlowski wrote:
On 1/23/2021 2:20 PM, edward geiser wrote:
I need instructions on how to use a 6 outlet timer SP-043 timer with 6 covered outlets.

This may be the same timer setup and you can download instructions from
this web site
https://tinyurl.com/y2tart3w

Made by Smart Electrician & I can't find a website for it. The timer has a circle dial on it with no pointer for the hour. It has a turn on it that has ( I T O) but I can't get it to work except on the O for on I suppose. So I'm having problems setting the time on it! It just stays on all the time.



https://images.homedepot-static.com/...ff7bbe5d4b.pdf

If you can't get the pdf


1. Open the dial cover (F) on the timer and then move the timer switch
to the T (timer) position.

2. Turn the timer dial (G) clockwise until the current time (in hours)
is directly above the gray dot.

3. Pull the applicable trippers up to set the event OFF time and then
push the applicable trippers down to set the desired ON time.

4. Plug your electrical device into an outlet on the timer (A).

5. Turn your electrical device ON to enable the timer to control the device.