On Thursday, January 21, 2021 at 4:18:12 AM UTC-5, Puckdropper wrote:
Sonny wrote in news:ba8439dd-e908-40d8-98b9-
:
That's not totally safe. I'd use a different technique.

Sonny

I wouldn't trust it to be repeatable either. If that 2x4 is not tight to
the table, the work piece can slide under and your cut will be off ever so
slightly.

Puckdropper
It does not appear that the image is taken during the sawing action, looks like just the tightening of the clamp. I don't have a real concern with the set-up other than, as said before, repeatability or even consistency during the cut. Agree that it looks like the leading edge might be inclined to "dive" under the stop block. Reversing the bevel, with the leading edge up high, might offer a more consistent approach...