Testing a 14 pin audio IC
Ten years ago I bult a low-noise pre-amp based on a 1970's article in Elektor magazine.
It used a TBA231 dual op-amp IC.
It didn't work but I did not have time to test all the copper runs etc before I wa over-whelmed with 'work'.
This week I took it out and started fault-finding.There was one open connection, poorly soldered. I then checked the power links throughout the board and they were fine.
Next i connected in a little waveform generator to the input and one of those timy LCD screened chinese oscilloscopes to the output. Nothing.
So with no shortcircuits, I concluded that the capacitors were OK whch only leaves the IC.
I do not have another TBA231 or equyivalent but have no idea how to test the chip.
I am a bit out of date with electronics since my heydays
So any suggestions will be welcome.
TIA
--
Mint 20.04, kernel 5.4.0-42-generic, Cinnamon 4.6.7
running on an AMD Phenom II X4 Black edition processor with 8GB of DRAM.
|