View Single Post
  #46   Report Post  
Posted to sci.electronics.repair,sci.electronics.design
piglet piglet is offline
external usenet poster
 
Posts: 11
Default Why was the circuit designed to use a Callins in C7?

On 13/12/2020 3:52 pm, Don wrote:
In sci.electronics.design piglet wrote:
On 12/12/2020 6:19 pm, wrote:
On Sat, 12 Dec 2020 17:54:08 -0000 (UTC), "Don" wrote:

In sci.electronics.design
wrote:
On Sat, 12 Dec 2020 07:56:15 -0000 (UTC), "Don" wrote:


snip

Why was the circuit designed to use a Callins in C7?

Was it designed that way?

That circuit was barely designed at all. What's it supposed to do?

Your question restates the gist of this thread.

How can you know the circuit was barely designed at all if you don't
even know what's it supposed to do?

Because it's full of trimpots and selected values. It was probably
futzed until it worked. What's it supposed to do?


My guess is it was some kind of analog synth VCO, inputs EFG are summed
and make the ramp, square and triwave outputs at jacks HDJ.

Dig the 3.6V D3 zener in the path, the 3.9Meg and 680R R19 R20 and the
kooky voltage follower Q3 Q11 Q4 - the unijunction Q2 is probably the
least nasty part of it all.

Thats why I used the word unsavoury!


Someone elsewhere mentioned how late designer John Simonton tried to use
as few parts as possible, presumably to keep the total price down. So my
earlier Woz analogy may be more spot on than first realized.
Woz's Breakout game design reportedly earned a bonus from Atari
because it kept its chip count below 120. Supposedly way down, somewhere
in the neighborhood of 50 chips, it's said. Legend has it although Atari
paid the bonus (to Steve Jobs) Atari didn't understand how Woz's circuit
worked.

Danke,


Well in this design he didn't optimise enough. I can't see the need for
R14, but if needed for adjustment range R15 could be increased in
value to 200R. And R19 and R20 are providing an offset voltage of 1.5mV
but to a diff amp made from presumably unmatched and non-isothermal
Q6,Q7 and whose other input is derived from a vanilla zener and
follower. Even across minor room temperature changes the drift could be
horrible. I am baffled by that 1.5mV offset, bet you can just tie the
base to ground and save two resistors.

Also the polarity of C3 C4 C5 looks strange?

piglet