View Single Post
  #2   Report Post  
Posted to sci.electronics.repair
Liz Tuddenham Liz Tuddenham is offline
external usenet poster
 
Posts: 3
Default Receiver sensitivity

Ralph Mowery wrote:

While not really a repair,but more of a question.

Why is it that I have one of the portable receivers with a whip antenna
that is about 2 feet long and can receive very well the short wave
stations, but my ham receiver with a couple of feet of wire on the back
receives almost nothing. When I hook the normal antenna to it, it
receives vey well. The signal generator shows the sensitivity is very
good. It is not just one ham receiver,but several.

My theory is that the portable receiver is matched for a high impedance
short antenna, where the ham receiver is matched for a 50 ohm antenna.


Yes, that would account for it. The portable might connect the aerial
to a tuned circuit so the termination is optimally matched for both
resistance and reactance across the bands.

--
~ Liz Tuddenham ~
(Remove the ".invalid"s and add ".co.uk" to reply)
www.poppyrecords.co.uk