On 29/11/2020 15:48, Fredxx wrote:
On 29/11/2020 15:13:27, The Natural Philosopher wrote:
On 29/11/2020 13:04, Farmer Giles wrote:
I have an outside workshop/office that I ran some cat5 cable to some
years ago. This link is now playing up a bit - intermittent - and I
have been looking at replacing the cable, which I know has become a
bit fragile in places - a bit of a tedious job.
I understand that such a link can be achieved with suitable adaptors
through the ring main. Has anyone here done this who can offer
advice/guidance as the best and most economical way to go about it?
Frankly it doesn't work
speed is vile, and reliability is poor. If possible sort the cat 5 out
or use optical link or wifi dishes
I would have thought Yagis would be more suitable, smaller, discrete and
less susceptible to wind as well as cheaper?
Flat panel phased array are the typical offering. eg
https://www.solwise.co.uk/wireless-o...-2450-14pn.htm
I do use yagis on my Mifi pebble to get enough signal for full speed 3G
connection though. Pointing is rather tetchy with GHz band yagis.
--
Regards,
Martin Brown