El 24/11/2020 a las 16:48, Peter W. escribió:
https://www.manualslib.com/manual/45...page=28#manual
Have you been through the troubleshooting guide? Speculating wildly - it seems as if the print head is not hot enough so the ink does not separate cleanly from the ribbon to the label.
Peter Wieck
Melrose Park, PA
Thenk you, that did the trick. I have cleaned all with ethanol, but the
manual says the print head must be cleaned with 100 % acetone.
--
Best regards
Miguel Giménez