On 03/11/2020 13:21, Martin Brown wrote:
On 01/11/2020 16:57, williamwright wrote:
On 01/11/2020 07:09, John Rumm wrote:
On 01/11/2020 02:10, williamwright wrote:

Is it possible?

Yup, with a metal cutting blade. (and in reality, you might even get
away with a fine tooth wood blade)

Will it work?

3mm should be doable

I have a panel to cut out and some of the shapes are a bit awkward.

https://www.axminstertools.com/pegas...-pkt-12-502326


The only thing to watch out for is the soft aluminium metal clogging up
the blade. You might have to rub it with a file card from time to time.

Some aluminiums are worse than others. Oil helps but isn't a panacea.

WD40 is a good cutting lubricant for ali.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/