Andy Burns Wrote in message:
wrote:

MM wrote:

a butt joint made with 1" Triton pocket hole
screws and the Triton double pocket hole jig.

The wood is 15mm thick on the short side.

I did several test joints using thicker wood, e.g. 18mm and they
worked a treat.

But as the picture shows, on the thinner wood the screws stand proud
by about 1.5mm.

Errr, drill a deeper hole.

According to the instructions you raise/lower the jig's guide block to
match the thickness of wood being used

http://www.tritontools.com/Helpers/GetImage.ashx?type=InstructionManual&size=&name=35 5399_MANUAL.PDF


RTFM :-D
--
Jimk


----Android NewsGroup Reader----
http://usenet.sinaapp.com/