View Single Post
  #13   Report Post  
Posted to sci.electronics.repair
T i m T i m is offline
external usenet poster
 
Posts: 13,431
Default Schottky diode in SM PSU o/p?

On Sat, 10 Oct 2020 09:34:11 -0700 (PDT), John-Del
wrote:

snip

This is the PSU OOI: https://ibb.co/VtBY4Rt

The IC is a CR6338T.

snip

Years ago when everything was discrete, we saw plenty of power supplies so badly designed that an excessive load or even a brown out would cause a catastrophic failure (Sony).


;-(

Today, an properly designed IC SMPS controller is literally pennies each, and they have all that solved internally.


Ok.

Your IC does have a soft start internal to it and overcurrent protection, so the shorted Schottky diode did not seem to destroy the IC


Phew.

(check pin 5/6 to 4, should be no short on the internal mosfet).


5/6 to 4 test out like a pair of diodes but with a low resistance
(either way) between 5 and 6?

Cheers, T i m