On 06/10/2020 12:51, Graeme wrote:
In message , Chris Green
writes
Graeme wrote:

Only one name appears on the list of 'Local Area Connections', and that
name is the same as it always has been, although that means it is not
possible to see whether a device is connected to the original router or
either of the repeaters.Â* The mesh must be working though, as the signal
strength and speed is far better than in was, in areas that had a very
poor signal without the repeaters.

But would a 'non mesh' system with the same number of access points be
just as good - that's the question.

Within my limited knowledge of how these things work, the answer must be
yes, but with the proviso that only the mesh system seamlessly switches
devices from one source to another (i.e. always to the strongest signal)
without any user intervention.Â* But I may have misunderstood.

Non mesh can do that as well - sometimes called AP assisted roaming.
However many of the solutions are proprietary, so need the same range of
kit all over.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/