Filling Bath using instantaneous Electric Water Heater
On 28/08/2020 15:47, Fredxx wrote:
On 28/08/2020 14:17:51, John Rumm wrote:
Since a 125L cylinder of water at 60 degrees, should be able to supply
a moderate "bath full" when mixed down to temp with cold.
That was my thought. Is there any mileage in fitting a mixing valve to
the hot water output to reduce/stabilise the temperature and run the
tank at 90degsC?
A different thought has occurred to me.
It's an E7 set up. Is the bottom element working or getting a full
charge? Faulty/turned down stat etc.
I too would expect 125L of hot water to be plenty for a bath.
--
Adam
|