On Mon, 11 May 2020 17:43:59 -0500, swalker wrote:

On Mon, 11 May 2020 15:13:06 -0700 (PDT), DerbyDad03
wrote:

On Monday, May 11, 2020 at 1:39:40 PM UTC-4, swalker wrote:
Can rattle can lacquer be successfully sprayed over wipe on poly?

Need a little more shine.

This can be found here, regarding Deft Clear Lacquer Spray:

https://www.woodworkingshop.com/product/df10009/

"Do not apply Clear Wood Finish over varnishes, enamels (or any other
product that dries by oxidation); lifting or wrinkling may result."

I'm no finishing expert by any stretch of the imagination, but I'm pretty
sure that makes the answer to your question a "No".

Thanks.

My thought was that since poly can be cleaned up by mineral spirits
but lacquer is cleaned using lacquer thinner that they might be
compatible.

Probably good idea I checked with the list.

Back to the work bench.
Laquer is "hotter" than poly. Poly over laquer could possibly work.
laquer over poly is more likely to fail. Laquer over WELL CURED poly
could possibly be safe.