Plumber's putty isn't intended to be used on pipe threads.

Be careful when using pipe dope on PVC that the solvents in the pipe
dope don't soften the PVC pipe over time. Most pipe dopes are intended
to be used on copper, brass, or steel. They don't dissolve in organic
solvents, PVC does.

RB

Steve wrote:
Putting a pool filter together. When done with the teflon tape, about 8-10
windings, I get slight leaks where the PVC fitting threads into the valve
housing also where the PVC threads into the pump. A hose came off and the
pool drained to the skimmer level so I'm going to disasemble and redo the
fittings.
I bought plumbers putty thinking it may work better???
The guy at the store said to roll it into a snake and wrap around the
threads. I didnt like that method so I worked it into the threads all around
both the male and female threads. I assembled one fitting and pulled out the
putty that was forced out while threading the peices together.

I have a couple of joints to go but was hoping for some expert advice on the
proper/best way to make a water tight connection. I wont know if it leaks
untill I fill the pool to the proper level and turn on the pump. Then its to
late (or at least a pain) to fix.


Thanks for any advice!!!

Steve