Thread
:
Sch 80 threads in sch 40 fittings.
View Single Post
#
3
Posted to alt.home.repair
dpb[_3_]
external usenet poster
Posts: 1,325
Sch 80 threads in sch 40 fittings.
On 3/21/2020 12:22 AM,
wrote:
Has anyone else had problems with leaks when you screw a Sch 80 PVC
into a sch 40 (white) fitting? It doesn't seem to matter no tape, the
right amount of tape or a **** load of tape, they leak. You can run
them up until there no threads left and they still leak.
I am not sure if this is a vendor problem or just something that
happens. I am gluing them now.
Agree w/ fretwell; one or the other is wrong; by spec they should be
fine (other than the fittings aren't rated for service, but presuming
the leak test isn't above their ratings mechanical fit should be same).
Probably cheap import QA of one or the other; no way to guess which w/o
trying another supply of one or the other.
It's never wise to use a female Sch 40 fitting on a male Sch 80 pipe
end; other way round is safer altho still the fitting itself isn't rated.
Unless, of course, there's really no need for the Sch 80 at all in the
specific service other than perhaps just have on hand; the pressure
rating will never be approached.
--
Reply With Quote
dpb[_3_]
View Public Profile
Find all posts by dpb[_3_]