On Thu, 23 Jan 2020 17:58:33 -0500, micky
wrote:

In alt.home.repair, on Thu, 23 Jan 2020 08:02:27 -0500, Frank "frank
wrote:

On 1/22/2020 7:22 PM, micky wrote:
In alt.home.repair, on Wed, 22 Jan 2020 08:46:23 -0500,
wrote:

On Wed, 22 Jan 2020 03:39:01 -0800 (PST), Cindy Hamilton
wrote:

On Wednesday, January 22, 2020 at 12:45:28 AM UTC-5, wrote:
Hi,
I have one of those very large (96 gallon) plastic garbage bins with wheels. It has developed a vertical crack down the front. I've seen several videos on plastic garbage bin repairs, for example:
1. using heat gun to embed metal screen across the crack and into the plastic
2. using soldering gun to melt two sides back together and then add more plastic from a compatible source, usually a zip tie.
3. using a plastic welding gun (requires specialized equipment for the minor amount I need to do)
4. sanding the plastic, overlaying fiberglass mesh, and spackling over the whole thing with 2part epoxy.
Anyone have luck with these or other solutions?
Advice appreciated.
Thank you.
Theodore.


Do you own it or does your garbage hauler own it?
If the latter, call them up and ask for a replacement.
Cindy Hamilton


Yep.
In my district - it appears to belong to the hauler :

Even if it does belong to the hauler, it's in society's interest to
repair it. Why throw away 5 pounds of plastic to fill landfill and
never degrade if you can delay that. If the repair won't take too
much time or money, I'd repair it. You can replace it in a few years
when the repair failes.

https://www.bra.org/resources/supplies/

John T.


I did agree with your use of Gorilla tape. It might extend the
lifetime. Container is likely PE which is recyclable.

Speaking of recycling, I think it is stupid to have multiple cans for
different trash. Look at your friend Adam Schiff's house and you will

He's never invited me to his house. I don't think he likes me very
much.


see three cans. That means 3 different trucks will have to come to his
house for pickup. Trash should go into one can, handled by one truck

I don't think they actually use 3 trucks for this, that there's more
than one section in one truck.

It is 3 trucks here every week. One for horticulture, one for trash
and one for recycle. The recycle trucks have the lift for the 65
gallon tote. (when they are all working)
Otherwise it is all the regular garbage truck with a hopper in back
and a guy hanging on.