Bradley T. Murphy wrote:

I have a toilet which was used by a very large person and now wobbles front
to back. I pulled the toilet off and was going to just replace the wax
ring, but it looks like the closet flange is warped and I suspect this is
causing the wobbling. Will just replacing the wax ring fix this, or do I
need to go ahead and replace the closet flange while I am at it? I would
like to fix it right, but will settle for just the wax ring if there is a
good possibility it will solve the wobbling problem.

To add to the issue, the existing warped PVC closet flange is glued to the
sewer pipe. This is on the second floor. Thanks in advance for any advise
or tips.

Brad
is the flange too high and will not let the toilet sit on the floor??
the toilet should sit on the floor level and not wobble.... they do sell
some shims (small plastic pieces that will fit under the high side of
the toilet and stop it from a wobble.. i bought a couple of packs at
home depot when i had to install a replacement toilet and never had to
use them... they had like 5 or 6 in a pack for about $1.00 or so.. its
just a small 3/4 in wide by 2 in. long by zero to 1/8 in. piece of
plastic that you shove under the installed toilet and then cut off what
sticks out with a razor blade knife.....