Thread
:
Soldering a thermal fuse?
View Single Post
#
3
Posted to uk.d-i-y
alan_m
external usenet poster
Posts: 5,774
Soldering a thermal fuse?
On 19/01/2020 15:33,
wrote:
Hi All,
Connector heater packed up after falling over whilst on.
After much head scratching I found an O/C thermal fuse.
Ive got a replacement (157 degree), Im planning mechanical fixing with some machine screws and nuts, but was wondering, at that rated temp, would it be possible to solder it? Or would that = another O/C fuse?
TIA
Chris
I've soldered them on car resistor packs.
When cutting out the old fuse leave 0.25 to 0.5 of the wire. This allows
a mexchanical joint to be made by bending the wire and crimping with a
pair of pliers.
To solder you need a large (high wattage, 50W) and solder quickly
--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk
Reply With Quote
alan_m
View Public Profile
Find all posts by alan_m