Same question. Here is a post by mkpatzer quoted, but where was his
original post posted. It's not on Alt.home.repair

In alt.home.repair, on Sun, 8 Dec 2019 18:08:00 -0800 (PST),
wrote:

On Thursday, October 23, 2008 at 2:53:25 PM UTC-4, Paul Michaels wrote:
This past weekend the oven heating element and stove top burners on
our Kenmore electric range stopped working.

I did some quick online research and learned that the problem was most
likely due to a faulty 220V power connection. The appliance was still
getting 110v power because the clock/timer display and LED lights were
still working on the oven control unit.

I spent about 30 minutes checking and tightening all of the
connections and afterwards the 220v power supply was restored and the
range started working properly again.

I took pictures of the whole procedure and created a quick guide to
help out anyone else who may be experiencing the same problem with
their range.

Here's the photo album -
http://www.paulstravelpictures.com/K...V-Repair-Guide

Don't forget to unplug everything and turn off the power before you
begin! Good luck.

Cheers,
Paul Michaels
Ft. Lauderdale, FL


Thank you so much for the breakdown of that! We ran into that exact same problem today, and we lucked out with it being some minor corrosion on the plug. It saved us a hefty service charge and got done in minutes ^_^