On Sun 24/11/2019 13:10, charles wrote:
In article , Jeff Layman
wrote:
On 24/11/19 10:48, charles wrote:
In article , Jeff Layman
wrote:
On 24/11/19 04:18, Bill Wright wrote:
I want to put some LED lights on my sliding gate. I wondered if I
could power them inductively, with a power 'transmitter' fixed to the
gatepost and a power 'receiver' on the gate, positioned so when the
gate's shut they are close together and the LEDs come on. The power
requirement of the lights is 24W at 12VDC. The positional accuracy of
the gate is good.

Bill

Have you considered whether or not ultraflexible wire might be
suitable? Such as:
https://www.amazon.co.uk/BNTECHGO-Silicone-Flexible-Strands-Stranded/dp/B01C5DBKW6/ref=pd_sim_60_7?_encoding=UTF8&pd_rd_i=B01C5DBKW6& pd_rd_r=7ab77a56-bb0a-4039-b629-0fa1c8b13a41&pd_rd_w=BSR9P&pd_rd_wg=uNhTl&pf_rd_p= 6a30fab2-6ed5-4400-920a-f4b0f59e4ff9&pf_rd_r=T3B1NZZ9C076EZM52RTQ&psc=1&re fRID=T3B1NZZ9C076EZM52RTQ

Just out of interest, why do you need the leds to be so bright? Leds
using 24W would produce give thousand lumens. If you need that light
level, why not have them fixed on posts?

It's not 24w per led. It's 24w in total

I know. That still equates to a couple of thousand lumens assuming
around 80 lumens/w for a typical "domestic" led.

Have you been to Bill's property?

The problem with so much bright lighting is that people will mistake it
for the pub next door and keep driving into and damaging his gate!

--
Woody

harrogate three at ntlworld dot com