On 24/11/2019 04:18, Bill Wright wrote:
I want to put some LED lights on my sliding gate. I wondered if I could
power them inductively, with a power 'transmitter' fixed to the gatepost
and a power 'receiver' on the gate, positioned so when the gate's shut
they are close together and the LEDs come on. The power requirement of
the lights is 24W at 12VDC. The positional accuracy of the gate is good.

Bill

Same idea
https://www.mouser.co.uk/new/wurth-e...velopment-kit/

A FAQ suggests that the MAXIMUM spacing between coils is 10mm and damage
may occur when there is no load so when the coils are not aligned (maybe
even by a small amount) when the gate is moving the whole system may
have to be instantly switched off.

https://www.we-online.com/web/en/ele...spower_faq.php

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk