Leaking flex tap connector
John Rumm wrote in
o.uk:
On 12/11/2019 09:47, John wrote:
John Rumm wrote in
See section 2.1.3
I read the tip on here and it gave me a Eureka sensation!
It just gives me an "unnecessary complication that is more likely to
result in a leaking joint" sensation!
(i.e. pull it out too far and you will get a mechanically weak joint,
and poorer sealing since the olive will be too close to the end of the
pipe, which will then deform too much under tightening)
I did suggest (pass on) a millimetre or two.
|