On Mon, 4 Nov 2019 18:29:11 +0000, Tim Lamb
wrote:

In message ,
writes
On 03/11/2019 20:40, Tim Lamb wrote:
I take it your construction involves a shallow valley. The video
above advises one layer of glass mat (if it is not a trafficked area)
plus a gel coat on top.
It's slightly difficult to describe the roof. An existing single storey
pitched roof runs into an existing vertical wall. The new roof is 90
degrees to the single storey bit and has a hidden flat roof (middle
dotted line, below). This flat section slopes back to the single storey
roof and also slopes away from the vertical wall, so the water runs
back and then down the valley (V). All pitches are 62 degrees'ish. The
problem area is where the flat roof meets the original pitched roof,
along the middle dotted line.
__________
|
|
-------------|
/\ |
V/ -\---|
V/ \--|
---V/------\

Sadly that doesn't display well on my set up.

Does Turnpike have the option to display Fixed Pitch font (or not), as
Agent does Tim? My default on Forte Agent is proportionally spaced as
it makes it easier to read but as it sounds like you have seen, it
screws up any ASCII art. By checking 'Fixed pitch font' makes it all
appear as intended. ;-)

Cheers, T i m